Kaip naudoti ašlapimo analizatorius
Šlapimo analizatoriai yra labai vertingi diagnozuojant įvairias šlapimo sistemos, virškinimo sistemos, širdies ir kraujagyslių bei endokrininės sistemos ligas, stebint LX, įvertinant prognozes ir prižiūrint gyventojų sveikatą. Šlapimo analizatorius naudojamas šlapimui aptikti, o aptikimo rezultatai pasižymi tikslumu, aptikimo greičiu ir apsauga nuo{0}}kryžminių infekcijų.
Kaip veikti ašlapimo analizatorius
1. Pradėti:
Įjunkite pagrindinį šlapimo analizatoriaus maitinimą, įjunkite ekrano maitinimą, spausdintuvo maitinimą ir dialogo lange įveskite vartotojo vardą bei slaptažodį.
2. Pasiruošimas prieš analizę:
①Check whether the distilled water and deionized water are sufficient, whether the waste liquid pipeline is blocked, whether the waste liquid bucket is emptied, check whether the distilled water and deionized water are sufficient, whether the waste liquid pipeline is blocked, and whether the waste liquid bucket is emptied;
②Check whether the high-concentration cleaning tank has enough high-concentration cleaning solution;
③Check the sample needle, check reagent needle, check sample stirring needle and reagent stirring rod, and confirm that there is no dirt or bending. If dirty, clean the sample needle. If bent, replace the sample needle. If there is dirt, clean the stirring rod;
④ Calibration, preparation of quality control products.
3. Pradėkite aptikimą:
①Calibration: Place the kit calibrators for blood glucose, urea, creatinine, uric acid, and protein in the corresponding positions, click to start calibration;
②Quality control test: place it in the corresponding position and click to start the test, all items are under control for sample test;
③ The specimen is checked, and the number is placed in the corresponding detection position;
④Click the application item to apply for inspection, and click the start button to perform the inspection;
⑤Enter information in the system;
⑥ Review, print and issue reports.
4. Išjungimas:
When the urine analyzer is in the "idle" state, you can click Shut Down and follow the prompts to select "Exit" to perform the shutdown operation;
